The DOGENDORF Wax Stems are your base for building highest quality wax trees suitable for both
- traditional manufacturing
in conjunction with
- 3D printed models
High class raw materials and intense testing for the perfect recipe ensure
- seamless mounting of wax models
- stable and at the same time flexible feature during mounting
- high resistance when embedding
- best viscosity for melting out and
- residue-free burnout
The DOGENDORF Wax Trees are available in the following measures:
The DOGENDORF Receptacles are high quality and encase rubber and silicon moulds
of different sizes stable and anti-skiddingly through a specific bottom side.
During the entire wax injection process your rubber and silicon moulds
remain unmoved inside the Receptacle, which itself is held savely by the
DOGENDORF Standard Clamp Hand.
Therefore the direct contact of the rubber or silicon mould to the
injection nozzle at the wax injection kettle is always guaranteed.
The following inner sizes of Receptacles are available for
the DOGENDORF Standard Clamp Hand (120 x 100 mm):
- 65 x 50
- 75 x 60
- 85 x 70 and
- 110 x 90 mm
The following inner sizes* of Receptacles are available for
the DOGENDORF Memory Big Clamp Hand (230 x 150 mm):
- 65 x 50
- 75 x 60
- 85 x 70
- 110 x 90 and
- 120 x 100 mm
2-piece Receptacle (assembled) made of
- shock-resistant, special 2-component plastic (frame piece)
- hardwood handle
* Other sizes up to 220 x 140 mm on request
The Sorting Box is made from solid plastic,
has 44 recesses and a rotatable plexiglass cover,
Ø 200 mm, H = 20 mm
The Rubber Knobbed Plate simplifies the adequate usage of rubber moulds, which
don’t include any systematic leave-outs and elevations in their conception.
With the help of the Rubber Knobbed Plate the rubber mould is changed into
a compact, durable unit.
The Rubber Knobbed Plate contains 90 knobbed areas of which each conveys 4 small,
mushroom-like knobs. To equip a conventional rubber mould with these rubber knobs
usually 6 knobbed areas are necessary (two on the upper edge, two on the
lower edge and one on both outer edges).
The mushroom-like form of the knobs cause a push-button effect through which
the two counterparts oft he rubber mould are held together by themselves.
For this reason, the rubber mould forms a very compact unit within the injection process.
Rubber Knobbed Plate 110 x 110 mm
Cut-outs with spring function: Ø 10 mm
Dead-blow plastic hammer
Plastic support: 130 x 130 mm
We recommend a Silikone Spray, which has proved to be successful for many decades:
For pretreatment of your rubber and silicon mould the Silicone Spray can be sprayed
on the inner parts of the moulds to enable an easy take-out of the wax pieces.
This Silicone Spray conforms the product quality according to Aerosol-Richtlinie 2008/47/EG
which ensure your health savety regarding breathing when working with evaporating particles.
Content: 400 ml
The Mount for Wax Trees simplifies the optimal mounting of single wax pieces on a wax tree.
For the efficient production of wax trees and the simplification of a proper application
of each wax piece the mount for wax trees is used. A panel with a pin, on which
a silicon holder is attached provide the basis of this process.
The empty wax tree is plugged into the round notch in the center of the silicon holder.
To achieve perfect wax trees, the panel is mounted on a tiltable and turnable, stable holder,
so that for each new wax piece the appropriate position can be adjusted exactly and quickly.
Dimensions (∅ x H): ∅ 85 x 100 mm
Weight: 1.3 kg
The Ring Stand is at home at the goldsmith’s as well as at the wax injection work space.
Here rings made of wax can be mounted and worked on, e.g. for the imprinting
of stones as well as size changes of rings.
Dimensions (H x W x D): 70 x 50 x 135 mm
Weight: 345 g
Rotatable conical mandrel, made of aluminium, anodized
The Aluminium Box for Talcum Powder is indispensable for every wax injection work space.
The application of small quantities of talcum on the inner parts of the rubber or silicon mould
by a short-haired, hard brush ensures the easy liberating of the wax piece from the mould.
By the use of the Powder Box the risk of damaging the wax piece is decreased significantly.
By the funnel-shaped opening inside the aluminium cover the soiling of talcum is prevented
and avoids therefore the soiling of the rubber or silicon mould.
Dimensions (∅ x H): 80 x 80 mm
Weight: 590 g
The Vacuum Tweezer makes an efficient detail work with midget pieces possible.
With its handpiece smallest items like e.g. stones can be sucked in
and put down by the nozzle from and at at the right position
very quickly and precisely.
The Vacuum Tweezer lowers both the risk of a dropping out of the item
from the standard tweezer and increases the speed of each working step.
Therefore it is especially applicable for stonesetting, and setting of midget pieces
in the jewelry, watch and optical industries, as well as for modelmaking.
Dimensions (H x B x T): 125 x 135 x 150 mm
Weight: 1.6 kg
The FRIGOMAT and the FRIGOPLATE are the logical extensions to our
automatic DOGENDORF vacuum wax injection devices.
During the wax injection process energy is fed to the rubber and silicon mould, which
remains in the mould for a long time, because of the relatively poor heat conductivity of rubber and silicon.
To minimize this energy excess of the rubber and silicon mould quickly and to be able to carry out
the next injection process, the surplus heat has to be withdrawn.
This is made possible by the FRIGOPLATE, which cools the rubber and silicon mould
already before and after the injection process.
The FRIGOMAT can be connected with up to 3 FRIGOPLATES and is therefore able
to supply up to 3 DOGENDORF Vacuum Wax Injectors, each with 1 FRIGOPLATE.
The following types of DOGENDORF Vacuum Wax Injectors can be connected with the FRIGOMAT:
- VINJECT CNC
- ECO MASTER RSC
- ECO MASTER CC
- ECOMAT 2000 CC and
- BIG DOGI CC
When ordering one of the above mentioned DOGENDORF Vacuum Wax Injectors, the
cooling during the wax injection process can be ensure as well, as the
- Standard Clamp Hand (65 x 50 up to 120 x 100 mm moulds)
is cooled on its upper and lower clamping panel. The FRIGOMAT can supply 3 Standard Clamp Hands.
Cooling Output at +20 °C and RT 25 °C / 68 °F and RT 77 °F: 400 W
Temperature Control Range: -10 up to +40 °C / from 14 up to 104 °F
Dimensions (H x W x D): 510 x 280 x 320 mm
Weight: 25 kg
Voltage: 230 V
Amperage: 2 A
Frequency: 50 Hz