Products-en

Products-en (20)

Sorting Box

10 February 2018 Published in Products-en
Rate this item
(0 votes)

The Sorting Box is made from solid plastic,
has 44 recesses and a rotatable plexiglass cover,
Ø 200 mm, H = 20 mm

Sprue Cutter HY-CUT 12T

03 February 2018 Published in Products-en
Rate this item
(0 votes)

The HY-CUT 12T is the highly efficient and easily applicable
hydraulic sprue cutter for materials up to Ø 13 mm.

The device doesn’t demand much space and is therefore perfect
for small and middle-sized goldsmith workshops and productions.
By the easy, manual moving oft he lever a maximum pressure
up to 12 tons can be reached, so sprues of different diameters are cuttable.

Technical Data

Dimensions (H x W x D): 410 x 180 x 215 mm (measures without lever)
Cuttable Materials: Non-ferrous metals
Weight: 26.2 kg

 

Vacuum Tweezer

06 February 2018 Published in Products-en
Rate this item
(0 votes)

The Vacuum Tweezer makes an efficient detail work with midget pieces possible.

With its handpiece smallest items like e.g. stones can be sucked in 
and put down by the nozzle from and at at the right position
very quickly and precisely.

The Vacuum Tweezer lowers both the risk of a dropping out of the item
from the standard tweezer and increases the speed of each working step.

Therefore it is especially applicable for stonesetting, and setting of midget pieces
in the jewelry, watch and optical industries, as well as for modelmaking.

Technical Specifications

Dimensions (H x B x T): 125 x 135 x 150 mm
Weight: 1.6 kg

VINJECT CNC

03 February 2018 Published in Products-en
Rate this item
(0 votes)

The Device VINJECT CNC is an Automatic Vacuum Wax Injector
with Minimum Quantities Injection of Wax - Accuracy of 0.01g
(Latest Wax Injector Development, 2017) 

The fundamentally new, CNC controlled VINJECT CNC injector technology allows the injection of most precise volumes of wax in the rubber or silicon mould: The determination of the exact wax amount leads to the most exact results in wax injection. Accordingly, not only the wax leakage (too much wax) and the low injection (too little wax) doesn’t occur anymore. The VINJECT CNC makes the most efficient reproducability of wax pieces and therefore of the following casting parts possible.

Specifications

  • Optimal reproducability and repeatability
  • Entirely filled parts with rich surfaces, visually looking like pressed parts
  • Overmoulding, dripping and undermoulding will be prevented
  • Highest accuracy even of large-volume parts and most filigree details

Identification of Parameters

  • An RFID tag is attached on the rubber or silicon mould
  • ECO READ, the RFID reader attached on the clamp(ing) hand, identifies the RFID tags
  • Easy coding of the mould’s parameters
  • You can use your DOGENDORF Coding System,

    that means every  mould made for this system is applicable

Further Device Information

  • Automatically controlled adhesion pressure and infeed
  • Control (unit) with display and keyboard (4 languages – DE, GB, FR, ES)
  • Maximum filling content of the kettle: 6 l
  • Separate heatings for wax kettle and nozzle
  • Wax temperature from 55 to 85 °C / 131 to 185 °F
  • Values from 0.25 up to 1.5 bar may be adjusted by the potentiometer

2 Clamp Hand Sizes available:

  • 120 x 100 mm – Standard Clamp Hand (65 x 50 up to 120 x 100 moulds)
  • 230 150 mm – Big Memory Clamp Hand (65 x 50 up to 230 x 150 mm moulds)

Technical Data

Dimensions (H x W x D): 580 x 540 x 540 mm
Weight: 42 kg
Voltage: 230 V
Frequency: 50/60 Hz
Power input: 650 W

 

Vulcanizing Frame

10 February 2018 Published in Products-en
Rate this item
(0 votes)

The DOGENDORF Vulcanizing Frames have excellent surface characteristics,
made of milled aluminium and provide best stability. 

The Vulcanizing Frames can be ordered with Codifying Field of the
DOGENDORF Codifying System for the following rubber mould sizes*:

  • 65 x 50**
  • 75 x 60 (frame 60 x 120 x 118 mm)
  • 85 x 70 (frame 60 x 130 x 118 mm)
  • 110 x 90 (frame 79 x 135 x 157 mm)
  • 120 x 100 (frame 79 x 145 x 158 mm) und
  • 230 x 150 mm (frame 79 x 295 x 198 mm)

The anodized Vulcanizing Frames contain a DOGENDORF Codifying Field, too,
but on top of that they are equipped with ball-grips and an air connection to provide
a perfect rubber mould press-out directly after the vulcanization process with the
QUATTRO PARALLEL VP 200 (or VP 250, VP 160) for the easier operability.
They are available in the following rubber mould sizes*:

  • 65 x 50**
  • 75 x 60 (frame 60 x 120 x 118 mm)
  • 85 x 70 (frame 60 x 130 x 118 mm)
  • 110 x 90 (frame 79 x 135 x 157 mm)
  • 120 x 100 (frame 79 x 145 x 158 mm)

 

* Other sizes on request
**  The Codifying Field on the Insertion Plate with the size 65 x 50 mm uses
not the full range of parameters, as it is necessary
to ensure the full functionality despite its small size

 

Wax stems

11 February 2018 Published in Products-en
Rate this item
(0 votes)

The DOGENDORF Wax Stems are your base for building highest quality wax trees suitable for both

  • traditional manufacturing

    in conjunction with

  • 3D printed models

High class raw materials and intense testing for the perfect recipe ensure

  • seamless mounting of wax models
  • stable and at the same time flexible feature during mounting
  • high resistance when embedding
  • best viscosity for melting out and
  • residue-free burnout

The DOGENDORF Wax Trees are available in the following measures:

Disclaimer

We do our very best to keep all published information on this website up to date and correct. If you find reason why this is currently not the case, please let us know. Currently purchases and conditions are available through our distributors and for registered direct customers only.
The specifications and conditions of our direct offer is binding and overrules information given on this website.

Like to know more?

You are interested in our products and services? Something you are looking doesn't show up on this site?
Please don't hesitate to get in touch with us, so we can give you the best assistance for your matter and further improve our services and product portfolio.
We're looking forward to hearing from you!


Need to talk to us

Dogendorf GmbH & Co. KG
Schmucktechnik

Allmendring 13
75203 Königsbach-Stein

Germany

Phone: +49 (0) 72 32 - 28 98

E-Mail: info@dogendorf-schmucktechnik.com

Office hours

Monday through Thursday:
9:00 am - 5:00 pm
Friday:
9:00 am - 1:30 pm

Back to top